Raccoon Miniature Figure (3D Printed)

raccoon-3d.jpg
Image Source: Personal Photo

Here is another miniature figure that I have 3D printed. Like the dolphin I downloaded the .stl file from Thingiverse. The design was posted by Watanka and is under a Creative Commons CC-BY license.

When rounding up the physical print measures 27mm x 22mm x 30mm.

raccoon01.jpg
Image Source: Personal Photo

raccoon02.jpg
Image Source: Personal Photo

raccoon03.jpg
Image Source: Personal Photo

raccoon04.jpg
Image Source: Personal Photo

raccoon05.jpg
Image Source: Personal Photo

With 30% infill it took around half an hour to print and consumed almost 1.2 meters of 1.75mm PLA filament. The Thingiverse post for the model recommends a print speed of 30mm per second.

raccoon08.jpg
Image Source: Personal Photo

Support is necessary for the front overhang of the raccoon design. A bit of stubborn support still needs to be removed from under the snout and limbs of the model with tweezers but I'd say the print turned out well.

raccoon06.jpg
Image Source: Personal Photo

raccoon07.jpg
Image Source: Personal Photo

My Thingiverse account: https://www.thingiverse.com/holovision/designs
My Thangs account: https://thangs.com/Holovision
3D printing community on Hive: https://peakd.com/c/hive-103035/created