3D Printed Tronxy Elephant 2: Electric Boogaloo


tronxy-elephant.jpg
Image Source: Personal Photo

A few months ago I posted about my first 3D printing attempt. It was a pre-sliced file of an elephant that was included on the microSD card with my Tronxy XY-2 Pro 3D printer. It didn't work out well mostly due to the low quality sample filament I was using.

Tronxy-usb.jpg
Image Source: screen capture

I've returned back to the Elephant.gcode file for a second try at printing the elephant.

tronxy-elephant01.jpg
Image Source: Personal Photo

tronxy-elephant02.jpg
Image Source: Personal Photo

tronxy-elephant03.jpg
Image Source: Personal Photo

tronxy-elephant04.jpg
Image Source: Personal Photo

tronxy-elephant05.jpg
Image Source: Personal Photo

tronxy-elephant06.jpg
Image Source: Personal Photo

tronxy-elephant07.jpg
Image Source: Personal Photo

tronxy-elephant08.jpg
Image Source: Personal Photo

tronxy-elephant09.jpg
Image Source: Personal Photo

tronxy-elephant-printing.jpg
Image Source: Personal Photo

The end result this time was much better than my first attempt. The model had some imperfections on the trunk and ears. The pre-sliced file didn't have any supports which it probably should have a minimum amount of.

tronxy-elephant-front.jpg
Image Source: Personal Photo

I like the way the black PLA gives a shine to the model. One other notable difference from last time is that instead of the build plate that came with the 3D printer I used a PEI sheet for the printing surface which made the bottom of the model smooth.

tronxy-elephant-top.jpg
Image Source: Personal Photo

My Thingiverse account: https://www.thingiverse.com/holovision/designs
My Thangs account: https://thangs.com/Holovision
3D printing community on Hive: https://peakd.com/c/hive-103035/created